Filter
Top Products
SKU 42307 For technical questions, please call 1-800-444-3353. Page 9
MAINTENANCE AND
SERVICING
Proceduresnotspecically
explained in this manual
must be performed only by a
qualiedtechnician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the tool. Check
for loose hardware, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER USE: 2. Remove all sawdust
that has accumulated around the
Blade Guard (21), the Motor (1) and
the Motor Housing (36). Regularly
clean the work surface with a vacuum
cleaner or a dry brush. At the end of
every work session remove sawdust
from the motor vents. Prevent wood,
dust and debris from accumulating
in the working area. Keep the Saw
Blade (18) clean and sharp. A sharp
blade will minimize stalling and kick-
back.
3. WARNING! If the supply cord of
this power tool is damaged, it must
bereplacedonlybyaqualied
service technician.