Filter
Top Products
SKU 43585 For technical questions, please call 1-800-444-3353. Page 9
Figure I
To Use The Trimmer Guide:
The Trimmer Guide allows you to follow curved edges. NOTE: Because the
Trimmer Guide is narrower than the Straight Guide, it requires greater skill
and attention to produce a cut that is consistent in its relation to the edge.
1. To assemble the Trimmer Guide Assembly (part #71) attach the Roller (part #72) to
the Set Plate (part #73) using the accessory Bolt Washer (part #74) and the Wing
Bolt (part #75). (Figure I)
2. Attach the Trimmer Guide Assembly to the Bar Holder (part #69), using the acces-
sory Bolt Washer (part #74) and the Wing Bolt (part #75). (Figure J)
3. After measuring and setting the desired distance from Bit cutting depth to edge of
workpiece, carefully follow the edge of the workpiece as shown. (Figure K)
Figure J
Figure K
72
73
75
74
71
74/75
74/75