Filter
Top Products
SKU 43753 For technical questions, please call 1-800-444-3353. Page 3
Stay alert10. . Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
Check for damaged parts11. . Before using any tool, any part that appears dam-
aged should be carefully checked to determine that it will operate properly and per-
form its intended function. Check for alignment and binding of moving parts; any
broken parts or mounting xtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by
a qualied technician. Do not use the tool if any switch does not turn On and Off
properly.
Replacement parts and accessories12. . When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use acces-
sories intended for use with this tool. Approved accessories are available from
Harbor Freight Tools.
Do not operate tool if under the inuence of alcohol or drugs13. . Read warning
labels on prescriptions to determine if your judgment or reexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
Maintenance14. . For your safety, maintenance should be performed regularly by a
qualied technician.
Capacity15. . Never exceed the recommended capacity (springs up to 7” in diameter).
Only use this tool with MacPherson Struts. Never use with high pitched struts.
Use with hand tools16. . Never use any air, electric, or impact tools with this tool.
Only operate this tool with a 3/4” socket and ratchet, 3/4” combination wrench, or
other applicable hand tools. Power, air, or electric tools may compress the spring,
leading to injury.
Spring Coils17. . If spring coils do not compress evenly, discontinue the operation.
Loosen the adjusting screw, reposition the strut spring, and retry.
Adjustment Screw (6)18. . Before initial use, apply grease adjustment screw. Also,
apply grease periodically during use.
Be careful when spring is compressed19. . Do not drop or jar spring. Doing so
might result in personal injury or damage.
Reaching Torque20. . When reaching the maximum torque (15 ft-lb) by tightening the
adjustment screw, discontinue, and loosen the screw. Reposition and retry.
Always use vehicle support stands.21.
Have qualied service technician inspect this tool annually.22.
The warnings, cautions, and instructions discussed in this instruction manual can-23.
not cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.