Filter
Top Products
SKU 46309 Page 10For technical questions, please call 1-800-444-3353.
Assembly Drawing
Maintenance
Warning! Always disconnect the tool from the air compressor and then empty the magazine of nails before attempting to inspect or
perform maintenance to the Nailer.
1. Inspect all of the nuts and screws and make sure they are securely fastened.
2. Periodically lubricate the driving mechanism and magazine with a light oil. Wipe down with a clean cloth. Never use gasoline
or flammable solvents to clean the tool.
3. Inspect your air compressor according to manufacturer’s instructions.
REV 04/05