Filter
Top Products
14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain
applications for which this product was designed. Do not use small equipment,
tools or attachments to do the work of larger industrial equipment, tools or
attachments. Do not use this product for a purpose for which it was not intended.
15. PRIOR TO USING THIS PRODUCT, MAKE SURE TO READ AND
UNDERSTAND ALL INSTRUCTIONS AND SAFETY PRECAUTIONS AS
OUTLINED IN THE VEHICLES MANUFACTURER’S MANUALS.
16. NEVER WORK UNDERNEATH A VEHICLE WITHOUT USING ADDITIONAL
SAFETY SUPPORT DEVICES (I.E., JACK STANDS) TO SUPPORT THE
WEIGHT OF THE VEHICLE. Read and understand all safety warnings and
instructions provided in the instruction manual of the vehicle as well as the jack
stand being used to support the vehicle.
17. WARNING: This product contains or produces a chemical known to the State of
California to cause cancer and birth defects (or other reproductive harm).
(California Health & Safety Code 25249.5 et seq.)
UNPACKING
When unpacking, check to make sure the parts shown on page 10 of this manual are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
Note: All parts mentioned below refer to the parts listed and shown on
page 10 of this manual.
NOTE: This Master Ball Joint Adapter Set is intended for use with the
3-In-1 Service Kit (Model 38335), which is available from Harbor Freight
Tools. Read and understand all safety warnings and instructions provided in the
instruction manual of the 3-In-1 Service Kit before using the kit.
To Attach The Plug Bolt To The C-Frame:
1. The illustration on the following page depicts a disassembled C-Frame, a tool that
is part of the 3-In-1 Service Kit (Model 38335) and intended for use with this
Master Ball Joint Adapter Set. (See Figure A.)
SKU 46389 PAGE 4