Harbor Freight Tools 47274 Paint Sprayer User Manual


 
SKU 47274 For technical questions, please call 1-800-444-3353. Page 4
- Stains, oil-based paints, thinners, sealers, and water-proofers.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as respirators that are specially designed
to filter out microscopic particles. (California Health & Safety Code § 25249.5,
et seq.
)
Note: Performance of this tool (if powered by line voltage) may vary depending on variations
in local line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Additional Paint Gun Warnings
1. Although this paint gun is airless, it still puts out paint at a very high pressure. Through
improper use, paint can be injected through a persons skin, leading to serious injury,
possibly amputation. If paint is accidentally injected into someone’s skin, contact a
doctor immediately.
2. Never point your sprayer at anyone, including yourself. Gloves and clothing don’t offer
adequate protection from toxic paints, sealers, water-proofers, or stains.
3. Keep the trigger and the electrical cord plug clean and paint-free.
4. Never run your sprayer empty. Damage to the unit may occur.
5. Do not spray asbestos, metallic paints, glazes, red lead, cement, ground chalk,
abrasive grainy paints containing lime, or bleach through your spray gun. These will
severely damage the spray gun.
6. When storing, always coat the unit with a light household oil.
7. The Sprayer must be plugged into an outlet that is grounded in accordance with all
local codes and ordinances.
8. Use caution while spraying on windy days.
Unpacking
When unpacking, check to make sure the parts listed on page 8 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
REV 10/04