Harbor Freight Tools 47612 Nail Gun User Manual


 
Page 2SKU 47612 For technical questions, please call 1-800-444-3353.
Specications
Air Inlet 1/4” NPT
Recommended Air Pressure 70 – 120 PSI *
Nail Size Capacity 1-1/4” to 2-1/2” Long Nails
Nail Type 15 Gauge – 34°
Magazine Capacity 100 Nails
Safety Feature Full Sequential Contact Tip
Overall Dimensions 15-1/4” x 10-3/4” x 3-5/8”
Accessories Three Hex Wrenches, Air Tool Oil
Fasteners Available At
Harbor Freight Tools
SKU 90097 (15 GA Nails, 1-1/4”, 1000 PC)
SKU 90104 (15 GA Nails, 1-1/2”, 1000 PC)
SKU 90105 (15 GA Nails, 2”, 1000 PC)
* The air pressure setting must not exceed job site regulations/restrictions. The
air pressure setting must not exceed 90 PSI when being used with work pieces
that have a thickness of less than 1-3/4”.
Note: Performance of the compressor (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect the tool
performance.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equip-
ment.
Read all instructions before using this tool!
Keep work area clean. 1. Cluttered areas invite injuries.
Observe work area conditions. 2. Do not use machines or power tools in damp or
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of ammable gases or liquids.
Keep children away. 3. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
Store idle equipment. 4. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
REV 05j, 06k, 09b