Filter
Top Products
3. Use a pair of needle nose pliers and/or a screwdriver (both not included) to
remove the jammed Staple from the lower portion of the Nose of the Air Stapler.
(See Figure C.)
INSPECTION, MAINTENANCE, AND CLEANING
1. CAUTION: Always disconnect the Air Stapler from its compressed air sup-
ply source before performing any inspection, maintenance, or cleaning.
2. BEFORE EACH USE, inspect the general condition of the Air Stapler. Check for
loose screws, misalignment or binding of moving parts, jammed Staples, cracked
or broken parts, damaged air supply hose, and any other condition that may
affect the safe operation of this tool. If abnormal noise or vibration occurs, imme-
diately disconnect the Air Stapler from its compressed air supply source and
have the problem corrected before further use.
Do not use damaged equipment.
3. PERIODICALLY, use a premium quality, lightweight oil to lubricate all moving
parts.
4. When necessary, wipe with a damp cloth, using a mild detergent.
5. When storing, keep the Air Stapler covered with a clean cloth.
SKU 54425 PAGE 8
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.