Filter
Top Products
Page 2SKU 06098
(Peak)
12/03
Specifications
ITEM DESCRIPTION
Welding Current 25 ~ 85 amps
Duty Cycle
20% at 75 amps; 45% at 50 amps; 90% at 35 amps;
100% at 25 amps
Power Consumption 120 VAC, 21 amps at 60 Hz
Open Circuit Voltage 19 to 30 volts
Heat Control 25 ~ 85 amps, variable
Ground Cable 6 feet, 4 AWG, single instulation, grounding clamp.
Torch Power Cable 6 feet, 8 AWG, single insulation
Power Cord 6 feet, 3-core, 14 AWG, UL
®
Listed; 3-prong plug
Thermal Overload
Protection with Light
Automatic shutdown and restart after cool down
Wire Size
0.023 to 0.035 inch steel and stainless steel
0.030 to 0.035 inch aluminum; 0.030 flux core
Welding Material Size 22 gauge to 5/32"
Wire Spool Size 4 inch spool diameter
Weight 55.1 lbs.
Accessories
1 - Hand held shaded face shield
1 - Brush Hammer
1 - Wheel Kit
1 - 2 lb. spool of flux wire
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.