Filter
Top Products
SKU 67046 For technical questions, please call 1-800-444-3353. Page 4
Use the power tool and acces-f.
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
Battery tool use and care5.
Recharge only with the charger a.
specied by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
re when used with another battery
pack.
Use power tools only with speci-b.
cally designated battery packs.
Use of any other battery packs may
create a risk of injury and re.
When battery pack is not in use, c.
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to another.
Shorting the battery terminals to-
gether may cause burns or a re.
Under abusive conditions, liquid d.
may be ejected from the battery;
avoid contact. If contact acciden-
tally occurs, ush with water. If
liquid contacts eyes, additionally
seek medical help. Liquid ejected
from the battery may cause irritation
or burns.
Service6.
Have your power tool serviced by a.
a qualied repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Sander Safety Warnings
Maintain labels and nameplates on 1.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare 2.
to begin work before turning on the
tool.
Do not lay the tool down until it has 3.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
When using a handheld power tool, 4.
both hands to resist starting torque.
Do not leave the tool unattended 5.
when it is attached to a battery pack.
Turn off the tool, and disconnect it
from its battery pack outlet before
leaving.
6. The battery charger gets
hot during use. The
charger’s heat can build
up to unsafe levels and
receive adequate ventilation, due to
an electrical fault, or if it is used in a
hot environment.
-
mable surface. Do not obstruct any
vents on the charger. Especially
avoid placing the charger on car-
pets and rugs; they are not only
ammable, but they also obstruct
vents under the charger.
Place the charger on a stable, solid,
stable metal workbench or concrete