Filter
Top Products
SKU 67046 For technical questions, please call 1-800-444-3353. Page 7
SPECIFICATIONS
Battery Type 18V NiCd - SKU 67029
Charger SKU 67031
OPM 0-6000
Accessories
1 each - 80, 100, 120 grit sand
paper
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
disconnect the tool from its
battery pack before
assembling or making any
adjustments to the tool.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Functions
Power Switch (13)
Battery Pack
(SKU 67029)
(Sold Separately)
Mounting Pad (10)
Figure 1
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Work Piece and Work Area Set Up
Designate a work area that is clean 1.
and well-lit. The work area must not
allow access by children or pets to
Secure loose work pieces using a 2.
vise or clamps (not included) to pre-
vent movement while working.
3.
utility lines, nearby that will present a