Filter
Top Products
Page 8For technical questions, please call 1-800-444-3353.SKU 68126
SPECIFICATIONS
Charger Input 120V~ / 60Hz
Motor Speed
0-350 RPM (1st gear)
0-1300 RPM (2nd gear)
Battery
12V, 1300mAh Lithium-Ion
(ITEM 68059)
Chuck Capacity 3/8" (10mm)
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Functions
Chuck
Collar
Clutch
Collar
Trigger
Battery
Pack
Light
Direction
Switch
Gear Switch
Controls
TRIGGER:1.
This is a variable speed tool.
Squeeze the Trigger more to increase
speed, less to reduce speed.
The light will illuminate when the trigger
is pressed.
DIRECTION SETTING:2.
: (towards front of drill)
Press switch from the right side
of the drill to make the drill turn
clockwise, usually for tightening or
driving screws.
: (away from front of drill)
Press switch from the left side
of the drill to make the drill turn
counterclockwise, usually for
loosening or removing screws.
CLUTCH COLLAR:3.
1 - 11: These settings control the amount
of torque at the bit to prevent
stripping bolts and screws or
splitting wood.
Settings range from 1 - lowest
torque - to 11 - highest torque.
: This setting prevents the clutch
from slipping. It is used when
drilling holes.
GEAR SWITCH:4.
1: low gear, higher torque
2: high gear, faster speed
CAUTION To prevent drill damage,
do not adjust any setting halfway
between options.
Example:
Do not use the Drill with the Clutch
collar set between settings 11 and .