Filter
Top Products
Page 12 For technical questions, please call 1-800-444-3353. SKU 68169
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION: Turn the Trigger
off and unplug the tool from
its electrical outlet before
performing any inspection,
maintenance, or any
cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration
occurs, have the problem
corrected before further use.
Cleaning, Maintenance, and
Lubrication
1. BEFORE EACH USE, inspect the
general condition of the tool. Check for
loose hardware, misalignment or binding
of moving parts, cracked or broken
parts, damaged electrical wiring, and
any other condition that may affect its
safe operation.
2. AFTER USE, wipe the tool with a
clean cloth.
3. PERIODICALLY, and after each
prolonged and extensive application,
blow compressed air into the
motor housing slots to remove any
accumulated dirt and debris.
WARNING! If the supply cord
of this power tool is damaged, it
must be replaced only by a qualied
service technician.