Filter
Top Products
SKU 90003 PAGE 12
To Attach The Eye Shield Mounting Rods:
1. Insert one Screw (part #48) with a Washer (part #13) through a Bracket
(part #36) and the Left Eye Shield Mounting Rod (part #49). Then, firmly tighten
the Screw to secure the Left Eye Shield Mounting Rod to the body of the Bench
Grinder. (See Figure F.)
2. Repeat Step #1 to attach the Right Eye Shield Mounting Rod (part #33) to the
body of the Bench Grinder. (See Figure F.)
SCREW (#48) SCREW (#48)
WASHER (#13)
WASHER (#13)
BRACKET (#36)
BRACKET (#36)
LEFT EYE
SHIELD
MOUNTING
ROD
(#49)
RIGHT EYE
SHIELD
MOUNTING
ROD
(#33)
FIGURE F
To Attach The Eye Shields:
1. Loosen the Screw (part #55) on the Pressure Plate (part #50). Slide the Pres-
sure Plate onto the Left Eye Shield Mounting Rod (part #49). Then, re-tighten
the Screw so that the Eye Shield (part #26) can be moved up or down but will be
tight enough to stay in place. (See Figure G, next page.)
2. Repeat Step #1 to attach the remaining Eye Shield to the Right Eye Shield
Mounting Rod (part #33). (See Figure G.)
To Mount The Bench Grinder On A Workbench:
1. WARNING! Make sure the workbench (not included) to which the Bench
Grinder will be mounted is flat, level, and sturdy enough to bear the weight of the
Bench Grinder and other tools and materials being used.