Filter
Top Products
SKU 90120 For technical questions, please call 1-800-444-3353. PAGE 9
SYMBOLOGY
UNPACKING
When unpacking, check to make sure that the product is complete and undamaged (see
Parts List on page 14 for reference). If any parts are missing or broken, please call
Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
CHARGING
1. NOTE: The Battery Pack (4) requires charging. The first charge requires 5 hours
charge time prior to using the Cordless Drill.
2. Note: Always switch to a fresh battery when tool performance begins to
diminish. Severe heat is most destructive to a battery; the more heat generated,
the faster the battery loses power. A battery that gets too hot can be permanently
damaged. Never over-discharge a battery by using the tool even after tool perfor-
mance is decreasing. Never attempt to discharge a tool’s battery by continuing to
pull the tool trigger. When tool performance begins to diminish, stop the tool,
recharge the battery and use the fresh battery for optimal performance.
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
n
o
xxxx/min.
A
V ~