Filter
Top Products
Page 2SKU 90288
For technical questions, please call 1-800-444-3353.
Specications
Overall Dimensions 8-5/8” L with handle
Sanding Pad 3/8” Thick x 5-3/4” Diameter
Adhesive-backed Paper Re-
quired
Air Inlet 1/4” - 18 NPT
Inlet Screen 20-Mesh or Finer Required
CFM @ 90 PSI 8.0 CFM
Recommended Operating Pressure 90 PSI
No-Load Speed 10,000 RPM
Save This Manual
You will need the manual for the safety warnings and precautions, assembly in-
structions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted. Do not
use electrically powered tools in the presence of ammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attach-
ment to do the work of a larger industrial tool. There are certain applications
for which this tool was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this tool and do not use this tool
for a purpose for which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught
REV 07i