Filter
Top Products
Page 4SKU 90288
For technical questions, please call 1-800-444-3353.
18. Do not operate tool if under the inuence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
19. Use proper size and type extension cord. If an extension cord is required
for the air compressor (not included), it must be of the proper size and type to
supply the correct current to the tool without heating up. Otherwise, the exten-
sion cord could melt and catch re, or cause electrical damage to the tool.
20. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualied technician.
Note: Performance of the compressor that powers this tool (if powered by line volt-
age) may vary depending on variations in local line voltage. Extension cord usage
may also affect compressor performance.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known [to the State of
California] to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
*Lead from lead-based paints
*Crystalline silica from bricks and cement or other masonry products
*Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to lter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure all parts listed on Page 7 are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.