Filter
Top Products
10. Replacement parts. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
11. Do not operate this product if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not stand upon or try
to assemble this product.
12. Do not exceed the Maximum Weight capacity for either the Steps or the
Tray, mentioned in the
Specifications
table on page 2.
Caution: Be aware of dynamic loading!
Jumping or bouncing on the Stand may create for a brief instant, an excess
load, which may result in damage to the product and/or personal injury.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied
by the operator.
Unpacking
When unpacking, check to make sure the following parts are included.
If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual.
Assembly Instructions
Note: Assemble on a smooth surface to avoid scratching.
2. Select the Right Leg (4) and Left Leg (7). Attach the Lower Step (5) to the Legs
(4 & 7) (the mounting hole for the Post (3) must be on the Right Leg’s (4) side-
see Figure A
) by matching up the holes and securing with Bolts (14), Lock
Washers (17), Washers (16) and Nuts (15). Finger tighten.
3. Attach the Upper Step (6) as in step #2. Tighten all hardware.
See Figure A
.
SKU 91174 Page 3
Bolt (14)
Lock Washer (17)
Washer (16)
Nut (15)
Bolt (14)
Lock Washer (17)
Washer (16)
Nut (15)
Figure A
Upper Step
(6)
Lower Step (5)
Left Leg (7)
Right Leg (4)
This hole must be
here-see Step 2.