Filter
Top Products
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a
safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Keep children away. Children must never be allowed in the work area. Do
not let children play with this product.
3. Store idle equipment. When not in use, this product must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
4. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
5. Use eye and ear protection. Always wear ANSI approved impact safety
goggles when working around tools.
6. Do not overreach. Keep proper footing and balance at all times.
7. Use the right tool for the job. Do not attempt to force a small stand to carry
the same weight as a larger stand. There are certain applications for which this
product was designed. Do not modify this product and do not use this product
for a purpose for which it was not intended.
8. Stay alert. Watch what you are doing, use common sense. Do not assemble
this product when you are tired.
9. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for loose parts and any other condition
that may affect the operation of this product. Replace loose or worn parts
immediately. Any part that is damaged should be properly repaired or replaced
by a qualified technician.
SKU 91174 Page 2
Specifications
Maximum Weight Capacity Steps: 350 Lbs.; Tray: 50 Lbs.
Tool Tray Lift Range 31-1/2” to 51-3/16”
Tool Tray Size 12” x 11-3/4” x 1” with 15 Holes (various sizes)
Step Sizes Lower: 15” x 19-11/16”; Upper: 7-7/8” x 19-11/16”
Steel Finish Red Enamel
Overall Weight 40 Lbs.