Filter
Top Products
SKU 91176 PAGE 6
7. Always remove the Battery Pack (14) before operation, inspection,
maintenance, or cleaning procedures.
8. Know what you are drilling into. When drilling into a structure, make sure no
electrical wires, cables, or plumbing is behind the surface.
9. WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of Cali-
fornia) to cause cancer, birth defects or other reproductive harm. Some ex-
amples of these chemicals are: lead from lead-based paints, crystalline silica
from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
10. WARNING! People with pacemakers should consult their physician(s)
before using this product. Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.
- Avoid operating power tools alone.
- Don’t use a power tool with the power switch locked on.
- If powered via a power cord be certain that the tool is properly grounded. A ground
fault interrupt (GFCI) system is also a good precaution. This inexpensive device is
a good safety measure because it prevents a sustained electrical shock.
- Properly maintain and inspect all tools before use to avoid electrical shock.
In addition, people with pacemakers should adhere to the following: