Filter
Top Products
SKU 91494 Page 5For technical questions, please call 1-800-444-3353.
SPECIFIC SAFETY RULES
1. Hold tool by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact
with a “live” wire will make exposed metal parts of the tool “live” and shock the
operator.
2. Maintain labels and nameplates on the Nailer / Stapler. These carry impor-
tant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
3. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Nailer / Stapler.
4. Do not force the Nailer / Stapler. This tool will do the work better and safer at
the speed and capacity for which it was designed.
5. Never leave the Nailer / Stapler unattended when it is plugged into an
electrical outlet. Turn off the tool, and unplug it from its electrical outlet before
leaving.
6.
Always keep your hands away from the workpiece when firing Brad
Nails and Staples. This Nailer / Stapler has enough power to force
Brad Nails or Staples through skin, causing serious injury.
23. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
REV 07/04