Harbor Freight Tools 91852 Saw User Manual


 
SKU 91852 For technical questions, please call 1-800-444-3353. PAGE 17
SWITCH LEVER
(41)
SAFETY BUTTON
(37)
FIGURE M
The Laser Assembly:
1. The Miter Saw is equipped with a Laser Assembly (148) for improved cutting
accuracy and convenience. (See Figure N.)
2. The Laser Assembly (148) is powered by two “AAA” Batteries (included). To
install the Batteries, open the Battery Box Cap (137). Insert two AAA Batteries
into the Battery Box (143), making sure to match the polarity of the Batteries with
the polarity signs (+ and -) as shown in the Battery Box. (See Figure N.)
3. To activate the Laser Assembly (148) depress the Laser Switch (136). Align the
cut line on the woodstock with the Laser Beam. Then, turn on the Miter Saw and
make the cut.
NOTE: Turn on the Laser
only
before you are ready to start cut-
ting, and make sure the Laser Assembly is off when not cutting. (See Figure N.)
LASER ASSY.
(148)
LASER SWITCH
(136)
BATTERY BOX
(143)
FIGURE N
REV 03/06