Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.SKU 92703
Keep children and bystanders away 9.
while operating Laser Level.
Inspect before every use; do not use if 10.
parts loose or damaged.
Stay alert, watch what you are doing 11.
and use common sense when operating
Laser Level. Do not use Laser Level
while you are tired or under the inuence
of drugs, alcohol or medication.
Dress properly. Do not wear loose 12.
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts.
Maintain labels and nameplates on 13.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
WARNING: 14. This product contains or,
when used, produces a chemical known
to the State of California to cause cancer
and birth defects or other reproductive
harm. (California Health & Safety Code
§ 25249.5, et seq.)
The warnings, precautions, and 15.
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SPECIFICATIONS
Laser Range Projects Up to 40 ft.
Max. Tripod Height 48”
Self Leveling Range 6°
Batteries (3) AAA (included)
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch to Off
before adjusting Laser Level.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
SAVE THESE
INSTRUCTIONS.
DANGER
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Max. Output: <5 mW,
Wavelength: 650 nm ± 10 nm
CLASS IIIa LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
CEN-TECH
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011
Manufacture Date: ___________, _______