Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. SKU 92841
Special Warnings About Paint Sprayers
Health and Safety
Hazard
Nature and Cause of Hazard Prevention of Hazard
Risk of Explosion
or Fire from Flam-
mable Materials
Spraying paints, solvents and thin-
ners mixes them with oxygen in the
air. This creates a more explosive
mixture than these materials in their
uid form. Rapid res and explosions
of these mixtures can cause death
or severe injury as well as signicant
property damage.
Never spray materials near re, ame, elec-
trical spark or any ignition source.
Never smoke when spraying or in the vicinity
of spraying. Never smoke in the work area.
Always provide good ventilation during and
after spraying to eliminate any enclosed
explosive atmosphere.
Risk of Fire or
Explosion from Ma-
terials Incompatible
with Aluminum.
Certain solvents, including
1,1,1-Trichloroethane and Methylene
Chloride can chemically react with the
Aluminum used in this spray equip-
ment. This can cause an explosion
which may result in death or serious
personal or property injury. Other
chemicals ,when mixed, may cause
unpredictable results.
Inform yourself by reading the information
provided with each solvent before introduc-
ing to the sprayer. Never spray the solvents
named at left in this sprayer which contains
Aluminum. Never use these materials for
cleaning equipment. Never use any solvent
if in doubt of its composition or compatibility
with Aluminum, other materials or this spray-
ing equipment.
Inhalation Hazard.
Inhaling solvents or sprayed materials
may cause severe injury to the lungs
or body, due to their chemical make
up or the fact that they may coat the
interior of the lungs.
Use an ANSI approved ventilator or face
mask. NOTE: Some face masks, such as
paper lters provide only limited protection
against harmful sprays and fumes. Consult
safety documents provided with the materi-
als you are spraying or an industrial safety
expert when determining the appropriate
respiratory protection.
Risk of Ejected Ob-
jects or Sonic Injury.
Many components of this tool and any
air pressure powered tool are under
signicant air pressure, even after the
air supply is disconnected. A signi-
cant risk of injury caused by ejected
components or materials diverted by
the stream of air pressure exists. High
pressure air escaping suddenly may
cause hearing injury.
Before doing any service to the sprayer,
disconnect it from the air supply. Then
depressurize the sprayer by pointing it in a
safe direction and holding the trigger until all
pressure is released.
Never point the nozzle toward any person
or animal.
Always wear ANSI approved safety glasses
or goggles when using or servicing this tool.
Always wear hearing protection when using
or servicing this tool or any air pressure
equipment.
UNPACKING
When unpacking, check to make sure the following parts are included.
LVLP Spray Gun
Paint Cup
If any parts are missing or broken, please call Harbor Freight Tools at the number on
the cover of this manual.
REV 05d