Filter
Top Products
Page 8 For technical questions, please call 1-800-444-3353. SKU 92841
HOW TO ADJUST PAINT FLOW AND AIR PRESSURE
To adjust the spray pattern, loosen the Nozzle Lock Ring (1) by turning it
counterclockwise, then rotate the Air Nozzle (2), then retighten the Nozzle
Lock Ring (1). For a vertical spray pattern, the “ears” of the Air Nozzle (2)
should be horizontal. For a horizontal pattern, the “ears” should be vertical. In
other words, the position of the Air Nozzle and the spray pattern are opposite.
Further adjustment of the spray pattern may be made by adjusting the Spray
Control Knob (27).
To control the amount of paint mixture being sprayed, adjust the Fluid
Valve Control Knob (23). Turning the Knob
clockwise will reduce the amount of paint,
turning it counterclockwise will increase the
amount of paint available.
To control the amount of air pressure
passing through the Sprayer, adjust the Air
Control Knob (12). Turning the Knob clock-
wise will reduce the air pressure, and turn-
ing it counterclockwise will increase the air
pressure. CAUTION: Do not overtighten the
Knob, as this will cut off the air supply, and
may damage the Air Control Seal (10).
Maintenance
After each use, thoroughly clean the spray gun.
1. Empty the Paint Reservoir of paint, and wipe it out with a clean rag.
2. Fill the Paint Reservoir about halfway with the solvent which is
appropriate for the paint you have sprayed.
3. Spray the solvent into an appropriate receptacle for proper disposal.
Continue to spray until paint in the interior of the Spray Gun is ejected
and the solvent spray is clear.
4. Using a clean rag wetted with solvent, wipe off the Spray Gun to remove
paint from the exterior.
5. Store your paint sprayer in a clean dry place.
Spray
Control
Knob (27)
Air
Control
Knob (12)
Fluid
Control
Knob (23)