Filter
Top Products
SKU 93088 For technical questions, please call 1-800-444-3353. Page 3
DO NOT ABUSE THE POWER CORD.9. Do not yank compressor’s cord to disconnect it
from the receptacle. Do not carry tools by the cord.
DO NOT OVERREACH.10. Keep proper footing and balance at all times. Do not reach over
or across running machines.
MAINTAIN TOOLS WITH CARE.11. Keep tools sharp and clean for better and safer perfor-
mance. Follow instructions for lubricating and changing accessories. Inspect compres-
sor’s cord periodically and, if damaged, have them repaired by an authorized technician.
Inspect all hoses for leaks prior to use. The handles must be kept clean, dry, and free
from oil and grease at all times.
REMOVE ADJUSTING KEYS AND WRENCHES.12. Make it a habit to check that keys and
adjusting wrenches are removed from the tool or machine work surface before plugging
it in.
AVOID UNINTENTIONAL STARTING. 13. Do not carry any tool with your nger on the trig-
ger, whether it is connected to the compressor or not.
STAY ALERT.14. Watch what you are doing; use common sense. Do not operate any tool
when you are tired.
CHECK DAMAGED PARTS.15. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts or
mounting xtures; and any other condition that may affect proper operation. Any part that
is damaged should be properly repaired or replaced by a qualied technician. Do not use
the tool if any switch does not turn on and off properly.
REPLACEMENT PARTS AND ACCESSORIES.16. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. 17.
Read warning labels on prescriptions to determine if your judgment or reexes are im-
paired while taking drugs. If there is any doubt, do not operate the tool.
DRAIN COMPRESSOR EVERY DAY. 18. Do not allow moisture to build up inside the com-
pressor. Do not allow compressor to sit pressurized for longer than one hour.
MAKE SURE ALL EQUIPMENT IS RATED TO THE APPROPRIATE CAPACITY. 19. Make
sure that regulator is set at least 10 PSI lower than the lowest rated piece of equipment
you are using.