Filter
Top Products
Page 2SKU 93211
For technical questions, please call 1-800-444-3353.
Motor 120 Volts AC /60 Hz / 90 Watts /
1
/
8
HP / 14,000 no load RPM
14,000 RPM Minimum Accessory Rating
Depth of Cut 3/4”
Table Two miter slots, 3/8” each with miter gauge;
7-1/2” L x 5-1/2” W
Arbor Diameter
1
/
2
”
Power Cord 5’, 18 Gauge, 3-prong plug
Blades
4” Dry Diamond Blade
4” x 40 T Manganese Steel Saw Blade
Net Weight 6.8 Lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted. Do not
use electrically powered tools in the presence of ammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
5. Do not force tool. It will do the job better and more safely at the rate for which
it was intended. Do not use inappropriate attachments in an attempt to exceed
the tool capacity.
6. Use the right tool for the job. Do not attempt to force a small tool or attach-
ment to do the work of a larger industrial tool. There are certain applications
for which this tool was designed. Do not modify this tool and do not use this
tool for a purpose for which it was not intended.
REV 06c
Specications