Filter
Top Products
Page 3SKU 93211
For technical questions, please call 1-800-444-3353.
7. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
8. Use eye and ear protection. Always wear ANSI-approved impact safety
goggles. Wear a full face shield if you are producing metal lings or wood chips.
Wear an ANSI-approved dust mask or respirator when working around metal,
wood, and chemical dusts and mists. The included eye guard is intended to
supplement eye protection, NOT replace it.
9. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
10. Maintain tools with care. Keep tools sharp and clean for better and safer per-
formance. Follow instructions for lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease
at all times.
11. Disconnect power. Unplug tool when not in use.
12. Remove adjusting keys and wrenches. Check that adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
13. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before plugging in.
14. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
15. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting xtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualied technician. Do not use the tool if any switch does not
turn On and Off properly.
16. Guard against electric shock. Prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures.
17. Do not operate tool if under the inuence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
18. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use ac-