Filter
Top Products
Page 4SKU 93211
For technical questions, please call 1-800-444-3353.
cessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
19. Use proper size and type extension cord. If an extension cord is required,
it must be of the proper size and type to supply the correct current to the tool
without heating up. Otherwise, the extension cord could melt and catch re, or
cause electrical damage to the tool. This tool requires use of an extension cord
of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer
extension cords require larger size wire. If you are using the tool outdoors, use
an extension cord rated for outdoor use (signied by “WA” on the jacket).
20. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualied technician.
21. Warning: People with pacemakers should consult their physician(s) before
using this product. Electromagnetic elds in close proximity to a heart pace-
maker could cause interference to or failure of the pacemaker.
22. Take caution as some woods contain preservatives such as copper chro-
mium arsenate (CCA) which can be toxic. When cutting these materials extra
care should be taken to avoid inhalation and minimize skin contact.
23. WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contains chemicals known [to the State of
California] to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
*Lead from lead-based paints
*Crystalline silica from bricks and cement or other masonry products
*Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to lter out microscopic particles. (California Health &
Safety Code § 25249.5, et seq.)
Note: Performance of this tool (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool perfor-
mance.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.