Filter
Top Products
SKU 92917 & 93253 For technical questions, please call 1-800-444-3353. Page 2
Specifications
92917 93253
Unit Weight 8 lb. 6 lb.
Housing Material Aluminum Alloy Magnesium
Fastener Length Capacity 3/4” to 1-3/4” Long
Fastener Thickness 0.12” Diameter (Approximately)
Magazine Capacity 120 Nails
Operating PSI 70 to 100
Air Consumption 2.5 CFM @ 90 PSI
Triggering Type Full-Sequential Safety Mechanism
Accessories
5 mm Hex Wrench, Pneumatic
Tool Oil, Coil of 120 Nails,
Carrying Case
5 mm Hex Wrench, Pneumatic
Tool Oil
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Do not expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for which
1.
2.
3.
4.
5.
REV 09/05; 12/05