Page 10SKU 93431 For technical questions, please call 1-800-444-3353.
SYMBOLOGY
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any parts
are missing or broken, please call Harbor Freight Tools at the number shown on the cover
of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 13.
CAUTION: Always make sure the Power Cord (13) of the Sander is unplugged from its
electrical outlet prior to making any adjustments or doing servicing, or adding or remov-
ing sanding discs.
ATTACHING THE DUST BAG (28)
1. Slide the Dust Bag (28) onto the back of the Sander. Snap it in place using firm
pressure.
2. The collection of the dust will only
work if the sandpaper has holes
that line up with the 8 dust
collection holes in the Backing
Pad (23). There are 4 other holes
in the Backing Pad for the Screws
(26) that attach the Backing Pad
to the Sander.
Dust Bag (28)
Backing Pad (23)