Filter
Top Products
Page 12SKU 93431 For technical questions, please call 1-800-444-3353.
INSPECTION, MAINTENANCE, AND CLEANING
1. WARNING! Make sure the Power Switch (15) of the Sander is in its “OFF”
position and that the tool is unplugged from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures.
2. BEFORE EACH USE, inspect the general condition of the Sander. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. Wipe the unit down after each use with a dry, lint free cloth.
2. Make sure the vents on the top are clear of dust and debris.
3. Periodically, have a qualified service technician clean or replace the Carbon Brushes
(9).
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY
PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
PARTS LIST
Part # Description Qty. Part # Description Qty.
1 Top Enclosure 1 15 On/Off Switch 1
2 Bottom Enclosure 1 16 Bearing 9x26x8 1
3 Stator 1 17 Balance Fan 1
4 Rotor 1 18 Bearing Holder 1
5 Right Label 1 19 Bearing 15x32x9 1
6 Left Label 1 20 Damper 1
7 Bearing 6x19x6 1 21 Gasket 1
8 Brush Holder 2 22 Screw M4x12 1
9 Carbon Brush 2 23 Backing Pad 1
10 Cord Anchor 1 24 Gasket M4 4
11 Screw ST3.5x16 2 25 Spring Gasket 4
12 Cord Guard 1 26 Screw M4x8 4
13 Power Cord and Plug 1 27 Screw 4.2x20 4
14 Switch Cover 1 28 Dust Bag 1
29 Sanding Disc 1