Filter
Top Products
SKU 93682 For technical questions please call 1-800-444-3353. Page 4
SERVICE (Cont’d)
17. When servicing the Stapler, use only identical replacement parts. Use of unauthorized
parts or failure to follow maintenance instructions may create a risk of electric shock or
injury.
18. Always unplug the Stapler from its electrical outlet before performing any inspection,
maintenance, loading or cleaning procedures.
19. WARNING! People with pacemakers should consult their physician(s) before using
this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock. Check with
a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not
modify the power cord plug provided with the Stapler. Never remove the grounding prong
from the plug. Do not use the Stapler if the power cord or plug is damaged. If damaged, have
it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1. Tools marked with “Grounding Required” have a three wire cord and three prong grounding
plug. The plug must be connected to a properly grounded outlet. If the Stapler
should electrically malfunction or break down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk of electric shock. (See Figure A.)
2. The grounding prong in the plug is connected through the green wire inside the cord to the
grounding system in the tool. The green wire in the cord must be the only wire connected to
the Stapler’s grounding system and must never be attached to an electrically “live” terminal.
(See Figure A.)
3. A grounded appliance must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See Figure A.)
Figure A