Filter
Top Products
SKU 93781 For technical questions please call 1-800-444-3353. Page 4
SERVICE (Cont’d)
17. When servicing the Battery Charger, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of electric
shock or injury.
18. Always unplug the Battery Charger from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
19. WARNING! People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
20. Do not expose the Battery Charger equipment to rain or wet conditions. Water
entering electrically powered equipment will increase the risk of electric shock.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock. Check
with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
Do not modify the power cord plug provided with the Battery Charger. Never remove the
grounding prong from the plug. Do not use the Battery Charger if the power cord or plug is
damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit
the outlet, have a proper outlet installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1. Tools marked with “Grounding Required” have a three wire cord and three prong grounding
plug. The plug must be connected to a properly grounded outlet. If the Battery Charger
should electrically malfunction or break down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk of electric shock. (See Figure A.)
2. The grounding prong in the plug is connected through the green wire inside the cord to the
grounding system in the tool. The green wire in the cord must be the only wire connected to
the Battery Charger’s grounding system and must never be attached to an electrically “live”
terminal. (See Figure A.)
3. A grounded appliance must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See Figure A.)
Figure A