Harbor Freight Tools 94434 Drill User Manual


 
SKU 94434 For technical questions, please call 1-800-444-3353 PAGE 3
Electrical Safety
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
Personal Safety
Stay alert. Watch what you are doing, and use common sense when operat-
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Trigger is released before plugging in.
Carrying power tools with your finger on the Trigger, or plugging in power tools with
the Trigger depressed, invites accidents.
Remove adjusting keys or wrenches before using the power tool. A wrench or
a key that is left attached to a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the power tool in unexpected situations.
Use safety equipment. Always wear ANSI-approved safety glasses underneath
a full face safety shield. Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
Use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control.
Tool Use and Care
Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
Do not use the power tool if the Trigger does not turn it on or off. Any tool that
cannot be controlled with the Trigger is dangerous and must be replaced.
1.
2.
1.
2.
3.
4.
5.
6.
7.
1.
2.