Harbor Freight Tools 94573 Paint Sprayer User Manual


 
Page 4 For technical questions, please call 1-800-444-3353. SKU 94573
Always follow all chemical label 6.
precautions and local EPA regulations
when using liquid chemicals. Do
not touch harmful chemicals. After
use, clean the Sprayer thoroughly with
agents recommended by the chemical
manufacturer.
Never point the nozzle of the Spray 7.
Gun Assembly at yourself, other
people, pets and animals, or property.
A note on Chemicals disposal: 8. Never
attempt to burn unused fertilizers,
herbicides, pesticides, or any other types
of chemicals. Make sure to check with
your local solid waste authorities for
proper disposal procedures.
Always make sure children and 9.
animals do not have access to
chemically treated areas.
Dry running will cause damage to 10.
the inner seals. Make sure the water
or liquid chemical supply used for the
Sprayer is not dirty or sandy.
Do not pull or carry the Sprayer by its 11.
Spray Gun Assembly. Use the Handle
on the Sprayer to move the tool from one
location to another.
The work area should have adequate 12.
drainage to reduce the possibility of a
fall due to slippery surfaces.
This product is designed for outdoor 13.
use only.
Keep the Cap and Spray Gun 14.
Assembly of the Sprayer connected
to the tool while the system is
pressurized. Prior to relling or
emptying the Tank, squeeze the
Trigger on the Spray Gun Assembly to
completely depressurize the system.
Prior to starting the Sprayer in cold 15.
weather, check all of the parts of
the tool to make sure ice has not
formed. Do not store the Sprayer
where the temperature will fall below 32°
Fahrenheit.
Do not keep water or any liquid 16.
chemicals in the Sprayer after use.
Make sure to clean the Filter of the 17.
Sprayer before each use.
Never leave the Sprayer unattended.18.
When nished using the Sprayer, empty
the unit. Thoroughly clean the unit and
store it in a clean, dry, safe location out
of reach of children.
The warnings and cautions discussed 19.
in this manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
People with pacemakers should consult 20.
their physician(s) before using this
product. Electromagnetic elds in close
proximity to a heart pacemaker could
cause interference to or failure of the
pacemaker.
SAVE THESE INSTRUCTIONS
GROUNDING
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM INCORRECT
GROUNDING WIRE
CONNECTION:
Check with a qualied electrician
if you are in doubt as to whether
the outlet is properly grounded.
Do not modify the power cord
plug provided with the tool.
Never remove the grounding
prong from the plug. Do not use