Filter
Top Products
SKU 94849 For technical questions please call 1-800-444-3353 Page 3
7. Use eye and ear protection. Always wear ANSI-approved impact safety
goggles and full face shield. Wear an ANSI-approved dust mask or respirator
when working around metal, wood, and chemical dusts and mists.
8. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
9. Maintain tools with care. Keep tools maintained and clean for better
and safer performance. Follow instructions for lubricating and changing
accessories. Inspect tool cords periodically and, if damaged, have them
repaired by an authorized technician. The handles must be kept clean, dry,
and free from oil and grease at all times.
10. Disconnect power. Unplug Battery Charger when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before using
the tool.
12. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use. Do not carry any tool with your nger on the trigger, whether the
battery is installed or not.
13. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
14. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting xtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualied technician.
15. Guard against electric shock. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
16. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
17. Do not operate tool if under the inuence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
18. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualied technician.