Filter
Top Products
SKU 94903 For technical questions please call 1-800-444-3353 Page 7
MAINTENANCE
Relling the Butane Canister:
WARNING: Do not use any other fuel other than butane which is specically de-
signed for this type of torch. Use of any other fuel may result in severe per-
sonal injury.
Be sure the tool is turned off and is cool.
Hold the tool in an upside down position, with the end of the handle facing up.
Insert and press down the lling tip of the butane canister.
Stop relling once the butane starts to overow.
Allow the relled tool to stabilize for a few minutes before resuming work.
Cleaning and Storing
The tip should be cleaned periodically during use with a damp sponge.
After use, allow the torch and all accessories to cool down to room temperature
before maintenance.
Wipe the tool down with a damp cloth to remove any grease, ux or dirt.
Be sure the Gas “ON/OFF” Switch Lock Button is in the OFF position.
Store the tool and its accessories in the Storage Case provided.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Using The Soldering Iron Stand:
Soldering Iron Stand
The torch comes with a stand that can be pulled out to allow you to rest it on a at
surface. See photo below.
REV 07j