Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
SKU 95578 For technical questions, please call 1-800-444-3353 PAGE 2
Item Description
Electrical
Requirements
120 VAC / 60 Hz / 4.2 Amps / 11,000 RPM
Power Cord Type: 18 AWG x 2C / 6’ Long
Power Plug Type: 2-Prong / Polarized
Power Switch Type: Toggle (ON/OFF)
Spindle Size 5/8”-11 TPI with 7/8” Arbor Adapter
Required
Grinding Wheel Size
(Not Included)
4-1/2” Diameter
1/4” Thick
7/8” Spindle Hole
Side Handle
Dimensions
4-1/2” Long x 2-1/4” O.D.
Overall
Dimensions
10-1/8” Long x 8” Wide x 3-3/4” High
(with Side Handle)
Net Weight 3.5 Pounds
debris such as chips and sparks. Provide barriers or shields as needed.
Children should not be allowed in the work area.