Filter
Top Products
9. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Angle Grinder.
10. Do not force the Angle Grinder. This tool will do the work better and safer at
the speed and capacity for which it was designed. Do not force the rotating
grinding wheel (not included) into the object being ground. Apply moderate
pressure, allowing the grinding wheel to rotate freely without being forced.
11. WARNING! Never install a carbide tipped or steel circular saw blade
for use on this tool. Never install a wood carving blade, carving disc with
saw chain cutters, or a cutting carving disc on this tool.
12. For safest operation, it is recommended that only these accessories be
used with this tool: Abrasive cut-off discs and wheels, flap wheels, wire
brushes, and wire wheel brushes.
13. Never lay this tool down until the rotating grinding wheel has come to a
complete stop. The rotating grinding wheel can grab the surface and pull the
tool out of your control.
14. Never leave the Angle Grinder unattended when it is plugged into an
electrical outlet. Turn off the tool, and unplug it from the electrical outlet before
leaving.
15. Always unplug this tool from its electrical outlet before performing inspec-
tion, maintenance, or cleaning procedures.
8. Use only 4-1/2” diameter grinding wheels (not included) having a 7/8” center
spindle hole. Never disable or modify the Wheel Guard (4).
16. WARNING! Keep hands and fingers away from cutting area and rotat-
ing grinding wheel.
17. Before using the Angle Grinder, always check to make sure the grinding
wheel (not included) is properly mounted and is not cracked or dull.
18. Industrial applications must follow OSHA guidelines.
19. The grinding wheel (not included) will become hot while cutting. Allow the
grinding wheel to completely cool before handling.
20. To avoid accidental injury, always wear heavy duty work gloves when
changing the grinding wheel.
21. WARNING! Some dust created by power sanding, sawing, grinding, drilling,
SKU 95578 For technical questions, please call 1-800-444-3353 PAGE 6