Harbor Freight Tools 95666 Impact Driver User Manual


 
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES AND PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create
SKU 95666 For technical questions, please call 1-800-444-3353 PAGE 2
The Emission Control System for this product’s engine is warranted for standards set by the U.S.
Environmental Protection Agency. For warranty information, refer to the last pages of this manual.
This product requires a 25:1 ratio of fuel and 2-cycle oil to be added to its fuel tank before starting.
Attempting to start the Engine with an improper fuel mix, low or no fuel mix WILL ruin the Engine
and void the warranty.
The Engine’s Carburetor may need to be adjusted by a qualified mechanic for efficient high-
altitude use.
Item Description
Drive Size 1”
Maximum Bolt Capacity 1-5/8”
Output Torque Range 406 < - > 1250 Ft./Lb.
Gear Box Settings Reverse/Neutral/Forward
Engine Specifications Engine Type: Two-Stroke / Forced Air Cooling / Single Cylinder / Recoil Start
Engine Displacement: 51.7 cc
Engine Idling RPM: 2700
Engine No Load RPM: 9880
Engine Torque RPM: 7120
Fuel Tank Capacity: 34 Ounces (0.26 Gal.)
Fuel Mixture Required: 25:1 (25 Parts Unleaded Gasoline/1 Part 2-Cycle Oil)
Spark Plug Type: Torch ® L7T
EPA Approved
Accessories Side D-Handle (Qty. 1) / Top D-Handle (Qty. 1) / Spark Plug Wrench (Qty. 1)
4mm Hex Wrench (Qty. 1) / 5mm Hex Wrench (Qty. 1) / 6mm Hex Wrench (Qty. 1)
10 < - > 13mm Spanner (Qty. 1)
Net Weight 39.6 Pounds