Harbor Freight Tools 95666 Impact Driver User Manual


 
SKU 95666 For technical questions, please call 1-800-444-3353 PAGE 7
PRODUCT FEATURES
RECOIL
STARTER
(125B)
CHOKE
LEVER
(69)
GASOLINE
ENGINE
CENTRIFUGAL
CLUTCH
(199D)
GEAR
CASE
(209D)
HAMMER
HOUSING
(171D)
1”
SOCKET
SQUARE
DRIVE
(188D)
SUPPORT
HANDLE
(180D)
GEAR CHANGE
LEVER
(233D)
HANDLE
ASSEMBLY
(107)
STOP
BUTTON
(103)
THROTTLE
ASSEMBLY
(102)
FIGURE A
PRE-START INSTRUCTIONS
To Fill The Fuel Tank:
1. IMPORTANT! Your warranty is voided if:
You do not operate the Impact Wrench with the proper 25:1 fuel mix in its
Fuel Tank. Never run the Engine with an improper fuel mix, low or no fuel mix.
Running the Engine with an improper fuel mix, low or no fuel mix will
permanently damage the unit.
2. To obtain the proper 25:1 fuel mix, combine 25 parts unleaded gasoline with 1
part 2-cycle oil in a clean, approved container. Cover and shake to thoroughly
mix before each fueling. NOTE: Mix only enough fuel for a few days work. The
maximum storage time of mixed fuel is
three
months.
3. Once the proper fuel mix is obtained, unscrew and remove the Tank Cap (93).
PRIMER
(161.1C)
GEAR OIL PORT
(210D)