Filter
Top Products
SKU 95690-95692 For technical questions, please call 1-800-444-3353. PAGE 8
TROUBLESHOOTING
4. To clean: If using liquid chemicals, flush the interior and clean the exterior of the
Sprayer and its Spray Gun Assembly thoroughly with cleaning agents recom-
mended by the chemical manufacturer. Then, allow to air-dry. Do not use sol-
vents.
5. When storing: Always completely empty the Sprayer of liquid. Frost will damage
the Sprayer if the unit contains liquid. Store the Sprayer in an indoor area such
as a garage or shed. Make sure to store the Sprayer and any chemicals in a
safe, dry, clean location out of reach of children.
6. CAUTION! All maintenance, service, and repairs not discussed in this manu-
al should only be performed by a qualified service technician.
Problem Possible Solution
Unit does not spray. 1. Make sure there is an adequate amount of liquid in the Container.
2. Pump the Pump Handle to pressurize the system. (Do not squeeze the Lever on
the Spray Gun Assembly when performing this procedure.)
3. Make sure the Pump Handle is secured tightly onto the Container.
4. Make sure all connections to the Container are secure.
5. Make sure the Spray Head Nut is clear of dirt and debris.
Spray pattern is undesirable. 1. Make sure the Spray Head Nut is clear of dirt and debris.
2. Make sure the Sprayer is fully pressurized.