Harbor Freight Tools 96289 Heat Gun User Manual


  Open as PDF
of 14
 
Page 6For technical questions, please call 1-800-444-3353.SKU 96289
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to 13.
begin work before turning on the tool.
Do not leave the tool unattended when 14.
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
This product is not a toy. Keep it out of 15.
reach of children.
People with pacemakers should 16.
consult their physician(s) before use.
Electromagneticeldsincloseproximity
to heart pacemaker could cause
pacemaker interference or pacemaker
failure. In addition, people with
pacemakers should:
•Avoidoperatingalone.
•Donotusewithpowerswitchlocked
on.
•Properlymaintainandinspecttoavoid
electrical shock.
•Anypowercordmustbeproperly
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
Some dust created by power sanding, 17.
sawing, grinding, drilling, and other
construction activities, contains
chemicals known [to the State of
California] to cause cancer, birth defects
or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement
or other masonry products
Arsenic and chromium from chemically
treated lumber
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as those respirators
thatarespeciallydesignedtolterout
microscopic particles. (California Health
& Safety Code § 25249.5, et seq.)
The warnings, precautions, and 18.
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
GROUNDING
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM INCORRECT
GROUNDING WIRE
CONNECTION:
Check with a qualied electrician
if you are in doubt as to whether
the outlet is properly grounded.
Do not modify the power cord
plug provided with the tool.
Never remove the grounding
prong from the plug. Do not use
the tool if the power cord or plug
is damaged. If damaged, have it
repaired by a service facility
before use. If the plug will not t
the outlet, have a proper outlet
installed by a qualied
electrician.
REV 10c
 previous next