Filter
Top Products
Page 3
SKU 96445
For technical questions, please call 1-800-444-3353
Use eye and ear protection. Always wear ANSI-approved impact safety
goggles and hearing protection. Wear a full face shield if you are producing
metal filings or wood chips. Wear an ANSI-approved dust mask or respira-
tor when working around metal, wood, and chemical dusts and mists.
Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines or air hoses.
Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords and air hoses
periodically and, if damaged, have them repaired by an authorized technician. The
handles must be kept clean, dry, and free from oil and grease at all times.
Disconnect air supply. Disconnect air hose when not in use.
Remove adjusting wrenches. Check that adjusting wrenches are removed from the
tool or machine work surface before operating the tool.
Avoid unintentional starting. Be sure the trigger is released when not in use and
before plugging in. Do not carry any tool with your finger on the trigger, whether it is
plugged in or not.
Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not turn On and Off properly.
Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool. Approved accessories are available from Harbor Freight Tools.
Do not operate tool if under the influence of alcohol or drugs. Read warning labels
if taking prescription medicine to determine if your judgement or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the Sander.
Maintenance. For your safety, maintenance should be performed regularly by a quali-
fied technician.
Compressed air only. Use clean, dry regulated, compressed air at 90 PSI. Do not
exceed max. 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any
other bottled gas as a power source for this tool.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.