Filter
Top Products
Page 6SKU 97385 For technical questions, please call 1-800-444-3353.
the “C” Clamp (9). Slide the End
Slide (6) to the right or left along the
Fence Slides (5) to the point at which
you need to stop your material. Then
retighten the Knob (11) to secure the
End Slide (6) in place.
(See Assy. Diagram.)
NOTE: 4. The End Slide (6) may be in-
serted in either the left or right side of
the Fence Slides (5) depending upon
the application.
(See Assy. Diagram.)
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
router or drill press to its
“OFF” position and unplug
the machine from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS
INJURY FROM EQUIPMENT
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Inspection, Maintenance And Cleaning
BEFORE EACH USE,1. inspect the
general condition of the Router Table
Fence. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
and any other condition that may af-
fect its safe operation.
AFTER USE,2. clean external surfaces
of the Router Table Fence with a
clean, moist cloth and mild detergent.
Then dry. Do not use solvents.
WHEN STORING, 3. keep the Router
Table Fence in a clean, dry, safe loca-
tion out of reach of children and other
unauthorized people.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE
REPAIRS TO THE PRODUCT, OR THAT HE
PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR
BE UNDERTAKEN BY CERTIFIED AND
THERETO, OR ARISING OUT OF HIS OR
PARTS THERETO.
WARNING