Filter
Top Products
Page 13SKU 97719 For technical questions, please call 1-800-444-3353.
MAINTENANCE AND SERVICING
Procedures not specically explained in this manual must be performed
only by a qualied technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the tool to its “OFF” position and unplug
the tool from its electrical outlet before performing any inspection,
maintenance, cleaning, or storage procedures.
BEFORE EACH USE,1. inspect the general condition of the Arc Welder. Check for
cracked or missing insulators, damaged electrical wiring, and any other condition
that may affect its safe operation. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged equipment.
AFTER USE,2. clean external surfaces of the Arc Welder with a clean cloth. Use
compressed air to blow all dust and debris from the ventilation openings.
AFTER USE, 3. store the Arc Welder in a clean, dry, safe location out of reach of
children and other unauthorized people.
Note: When not in use, always keep the grounding cable and its Clamp (34)
disconnected from any metal object.