Filter
Top Products
Page 6SKU 97719 For technical questions, please call 1-800-444-3353.
People with pacemakers should 12.
consult their physician(s) before
use. Electromagnetic elds in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure. In addition,
people with pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
WARNING: This product, when used 13.
for welding, plasma cutting, soldering,
or similar applications, produces
chemicals known to the State of
California to cause cancer and birth
defects (or other reproductive harm).
(California Health & Safety Code §
25249.5, et seq.)
14. Prevent eye
injury and
burns. Wearing
and using
ANSI-approved
personal safety clothing and safety
devices reduce the risk for injury.
Wear ANSI-approved safety impact •
eye goggles underneath welding
eye protection featuring at least a
Number 10 shade lens rating.
Leather leggings, re resistant •
shoes or boots should be worn
when using this product. Do not
wear pants with cuffs, shirts with
open pockets, or any clothing that
can catch and hold molten metal or
sparks.
Keep clothing free of grease, •
oil, solvents, or any ammable
substances. Wear dry, insulating
gloves and protective clothing.
Wear an approved head covering •
to protect the head and neck. Use
aprons, cape, sleeves, shoulder
covers, and bibs designed and
approved for welding and cut ting
procedures.
When welding/cutting overhead •
or in conned spaces, wear ame
resistant ear plugs or ear muffs to
keep sparks out of ears.
15. Prevent accidental res.
Remove any combustible
material from the work
area.
When possible, move the work to a 16.
location well away from combustible
materials. If relocation is not pos-
sible, protect the combustibles with a
cover made of re resistant material.
Remove or make safe all combustible 17.
materials for a radius of 35 feet (10
meters) around the work area. Use
a re resistant material to cover or
block all open doorways, windows,
cracks, and other openings.
Ground this product. This Welder 18.
requires the attachment and use
of a UL-listed, 240 volt, grounded,
3-prong, electrical Power Cord Plug
(not included). Only a qualied
electrician should install the Power
Cord Plug. Never remove the
grounding prong or modify the Power
Cord Plug in any way. Do not use
adapter plugs with this product.
Do not use near degreasing or 19.
painting operations.
REV 09d