Filter
Top Products
Page 11
SKU 97925, 99676
For technical questions, please call 1-800-444-3353.
Impact Wrench, and the Charger is unplugged from an electrical outlet prior to
making any adjustments to the tool.
Trigger: Squeeze the Trigger to turn the Impact Wrench on and release pressure on the
Trigger to turn the Impact Wrench off.
Forward/Reverse Switch: The Forward/Reverse Switch allows you to change the rota-
tional direction of the Impact Wrench. For a clockwise rotation, move the Forward/
Reverse Button to the left. For a counterclockwise rotation, move the Forward/Re-
verse Button to the right. To avoid damage to the Impact Wrench, always wait until
the tool completely stops before changing rotational directions.
1/2" or 3/4” Drive Impact Head: The Impact Head features a spring and ball to se-
curely hold a socket.
Battery: The power source for the Impact Wrench is a rechargeable, 19.2 VDC Battery.
Make sure to follow all safety precautions when working with the Battery.
Charger: The Charger is powered by plugging the Power Plug into a 120 volt, ground-
ed, electrical outlet. NEVER attempt to power the Charger with any other electrical
source other than a 120 volt, grounded electrical outlet.
To 120 Volt,
Grounded,
Electrical
Outlet.
Battery
Charger
Impact
Head
Trigger
Forward/Reverse
Switch
Battery
FIGURE A
Brush Holder Cap
Charging
The Battery must be charged prior to the rst use of the Impact Wrench.1.
After rst use, the Battery should only be recharged when the performance of the 2.
Impact Wrench begins to diminish. Severe heat is destructive to batteries; the
more heat generated, the faster the battery will lose power. A battery that gets too
hot can be permanently damaged. Never discharge the battery by continuing to
REV 09b