Filter
Top Products
Page 7
SKU 97925, 99676
For technical questions, please call 1-800-444-3353.
• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter
(GFCI) should also be implemented – it prevents sustained electrical shock.
Some dust created by power sanding, sawing, grinding, drilling, and other con-12.
struction activities, contains chemicals known [to the State of California] to cause
cancer, birth defects or other reproductive harm. Some examples of these chemi-
cals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement or other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles. (California Health & Safety Code
§ 25249.5, et seq.)
WARNING: Handling the cord on this product will expose you to lead, a chemical 13.
known to the State of California to cause cancer, and birth defects or other re-
productive harm. Wash hands after handling. (California Health & Safety Code §
25249.5, et seq.)
The warnings, precautions, and instructions discussed in this instruction manual 14.
cannot cover all possible conditions and situations that may occur. It must be un-
derstood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
GROUNDING
Improperly connecting the grounding wire can result in
electric shock.
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT
GROUNDING WIRE CONNECTION:
Check with a qualied electrician if you are in doubt as to whether
the outlet is properly grounded. Do not modify the power cord plug
provided with the tool. Never remove the grounding prong from the
plug. Do not use the tool if the power cord or plug is damaged. If
damaged, have it repaired by a service facility before use. If the plug
will not t the outlet, have a proper outlet installed by a qualied
electrician.
WARNING